Care Guide
Quick tips for proper installation, cleaning, and care so your 22Eighteen accessories stay protected and looking their best.
Phone Cases
Materials
Standard Flex Case
- Shell made from TPU (Thermoplastic Polyurethane) plastics
- The back of the shell is made from PC (Polycarbonate) plastic
- 3M Adhesive
- The image plate made from Aluminum
Bumper Flex Case
- Shell & corner airbags are made from TPU (Thermoplastic Polyurethane) plastics
- The back of the shell is made from PC (Polycarbonate) plastic
- 3M Adhesive
- The image plate is made from Aluminum
MagSafe Flex Case
- Shell made from TPU (Thermoplastic Polyurethane) plastics
- The back of the shell is made from PC (Polycarbonate) Plastic with a series of magnets placed inside of the plastic, made to align with the internal charging coil inside of the iPhone for perfect, strong magnetic charging
- 3M Adhesive
- The image plate is made of PVC (Polyvinyl Chloride/Vinyl) plastic
Care
Keep your 22Eighteen Phone Case looking fresh and flawless with these care instructions:
- Use a soft, damp microfiber cloth (included with your purchase) to gently clean the aluminum plate and remove fingerprints or smudges. Avoid abrasive scrubbing to maintain the vibrant design.
- For deeper cleaning, mix a small amount of mild dish soap with water, dampen a cloth, and wipe the case down. Rinse with a clean, damp cloth and dry immediately.
- Stay away from alcohol-based cleaners, bleach, or ammonia, as these can fade or damage the printed design over time.
- While the TPU/PC plastic frame offers durability, avoid dropping the case from extreme heights to prevent cracks or warping.
- Prolonged exposure to direct sunlight or high heat (like leaving it in a hot car) may weaken the plastic and affect the print’s longevity.
- If your case gets exposed to dirt, makeup, or oils, remove it from your phone before cleaning to prevent moisture from getting inside.
Charms & Straps
Materials
*Always check the materials in the actual product listing, as the materials vary
DIVA CHARMS
- Painted plastic & stained glass beads
- Korean waxed thread/cord OR
- Elastic cord
STRAPS & CHAINS
- Plated Nickel Chains
- Vinyl Straps
- Metal Buckles
- Faux Leather: Polyurethane
- Painted Plastic or stained glass Beads
Care
- Spot clean only
- IF submerging in water, air dry immediately & thoroughly.
- DO NOT use heat
- DO NOT use harsh chemicals such as bleach as it will cause discoloration on thread or beads
Bookmarks
Materials
METAL BOOKMARKS
Our metal bookmarks are made of 100% Aluminum Metal
MAGNET BOOKMARKS
Our magnetic bookmarks are made of laminated cardstock over 2-thin, magnetic strips
Care
METAL BOOKMARK
- If cleaning, remove tassel or adornment from metal first
- Use mild detergents/cleaning agents
- Spot cleaning with damp towel/cloth is best
- DO NOT submerge in harsh chemicals such as bleach as it may have a reaction to the printed design & metal
MAGNETIC BOOKMARK
- To clean, simply use a damp towel or cloth to wipe clean
- Do not submerge into water as it will cause the cardstock to break down under the laminated plastic
Coasters
Materials
Our Car Coasters are made from:
- Upper/Design: Neoprene (Polychloroprene)
- Bottom: Rubber
Care
- Hand wash only
- Use mild detergents
- NOT dishwasher safe
- NOT microwave safe
- DO NOT soak
- Avoid contact with chemicals such as bleach
Bags
Materials
TOTES
Totes are made from 100% Polyester Canvas
TRAVEL POUCH
- Pouches are made of polyester canvas
- Zipper & Pulls are made of aluminum metal and can be coated in paint. Zippers & pulls vary.
Care
Keep your 22Eighteen Phone Case looking fresh and flawless with these care instructions:
- Use a soft, damp microfiber cloth (included with your purchase) to gently clean the aluminum plate and remove fingerprints or smudges. Avoid abrasive scrubbing to maintain the vibrant design.
- For deeper cleaning, mix a small amount of mild dish soap with water, dampen a cloth, and wipe the case down. Rinse with a clean, damp cloth and dry immediately.
- Stay away from alcohol-based cleaners, bleach, or ammonia, as these can fade or damage the printed design over time.
- While the TPU/PC plastic frame offers durability, avoid dropping the case from extreme heights to prevent cracks or warping.
- Prolonged exposure to direct sunlight or high heat (like leaving it in a hot car) may weaken the plastic and affect the print’s longevity.
- If your case gets exposed to dirt, makeup, or oils, remove it from your phone before cleaning to prevent moisture from getting inside.
Keychains
Materials
Our Lipstick & Hand Sanitizer Pouches are made from:
- Neoprene (Polychloroprene) Rubber
- Aluminum Metal Split Ring
Care
- Hand wash/spot clean only
- Use mild detergents
- Avoid chemicals such as bleach
- Hang/air drying is prefered
- Tumble dry on the lowest, shortest setting
- DO NOT IRON
- DO NOT soak
Phone Ring
Materials
• Zinc Alloy Ring: Sturdy, lightweight, and made to last
• Aluminum Base Plate: Glossy finish with heat-pressed design
• 3M VHB Adhesive: Industrial-strength grip that sticks and stays
• Fade-Resistant Print: Keeps your design looking fresh over time
INSTALL
- Wipe the back of the device or device case you plan to use, down with alcohol or a cleansing cloth.
- Pull the white tab off of the adhesive, on the backside of the design and ring.
- Make sure your ring is either upright or flush against the device or device case that you want to adhere it to. (We recommend extending the ring 90 degrees, upright, over the design to better center and hold ring
- Using your hands, you will firmly press the ring onto the device or device case (we recommend using this product on Our 22Eighteen acrylic cases).
- Adhseive is 3M Very Strong Bond, so removing to reuse is NOT recommended. You may ruin or damage your device or device case.
Care
• Wipe the ring and base with a soft, dry cloth to maintain its shine.
• Avoid soaking or rinsing, it is made of an alloy metal that will tarnish in moisture.
• Forcing the ring to extend beyond 180 degrees while it is adhered to the phone case WILL cause it to break
• After applying to your case, give it 2–3 hours before use so the adhesive can lock in.
• DO NOT try to pry the ring off after adhering to phone case. If trying to remove from 22Eighteen case, you WILL damage the design plate
Carrying your phone by the ring, will cause the manufactured tightening of the ring rotation (the ring will spin instead of twist and lock in place) to weaken AND cause the 3M adhesive to weaken over time, which can result in your phone falling and breaking.
